ATL Terms and Conditions of Purchase
Acknowledgement of an Alpha Technologies' ("Alpha" or "ATL") PO is acceptance of ATL's Terms and Conditions of Purchase. Suppliers to Alpha can access Alpha's standard Terms and Conditions of Purchase here:
ATL Production Standards for Suppliers
All references of doc # 071-xxx-xx in Alpha/Argus drawings are superseded by Alpha document 0700001.
These documents are provided to Alpha' suppliers as general production standards for all custom parts or assemblies purchased by Alpha. The latest versions will always be available on this portal. If you have any questions about these standards or their contents, please contact your Alpha purchasing representative.
- 0700001: General Production Standards for Suppliers (Rev G, July 2023)
- 0700002: ATL Finishing Standards including Colour Codes for Metal Parts for Suppliers. (Rev BA, July 2024)
- 0700004: ATL Packaging Standards for Suppliers (Rev B, June 2014)
- 0700005: ATL Printing Standards for Suppliers (Rev C, October 2013)
- 0700007: PCBA Standards for Suppliers (Rev J, February 2023)
- 0700008: RoHS/REACH Standards for Suppliers (Rev F, September 2022)
- 0700009: ATL Standard for Self Cinching Fasteners (Rev A, November 2013)
- 0700012: ATL Threaded Fastener Torque Standard (Rev D, July 2015)
- 0700021: ATL Identification Standards for Suppliers (Rev D, November 2021)
- 0700028: ATL Standards for Tolerance (Rev A, March 2020)
- 0700029: ATL Test Documentation Guidelines for Suppliers (Rev C, May 2021)
Supplier Change Notices
Any changes to products purchased by Alpha should be communicated by sending a notice to This email address is being protected from spambots. You need JavaScript enabled to view it.. This includes changes to manufacturing processes or location, packaging, end-of-life or discontinuation notices, or similar.
Have Questions?
If you require assistance with any of the information provided here, please contact Alpha at:
- 1-800-667-8743 toll free in North America
- +1-604-436-5900 for International callers or
- This email address is being protected from spambots. You need JavaScript enabled to view it.
